Mathematics is important to the modern world. All quantitative science, including both physical and social sciences, is based on it. It provides the theoretical framework for physical science, statistics and data analysis as well as computer science. Our programmes reflect this diversity and the excitement generated by new discoveries within mathematics.
The School is very welcoming and there is lots of support available if you need it. It's a good environment to learn in.
The University will consider applications from students offering a wide range of qualifications. Typical requirements are listed below; students offering alternative qualifications should contact the Admissions Office for further advice. It is not possible to offer places to all students who meet this typical offer/minimum requirement.
Students can also enter the MMath programme by transfer from the standard three-year degree programmes at the end of Stage 2, provided they have passed the core modules and met the average mark threshold of Stage 2 of the MMath programme.
ABB including Mathematics at grade A. Use of Maths A level is not accepted as a required subject. Only one of General Studies or Critical Thinking can count as a third A level.
If taking both A level Mathematics and A level Further Mathematics:
ABC including Mathematics at grade A and Further Mathematics at grade B. Use of Maths A level is not accepted as a required subject. Only one of General Studies or Critical Thinking can count as a third A level.
The University will not necessarily make conditional offers to all Access candidates but will continue to assess them on an individual basis.
If we make you an offer, you will need to obtain/pass the overall Access to Higher Education Diploma and may also be required to obtain a proportion of the total level 3 credits and/or credits in particular subjects at merit grade or above.
The University will consider applicants holding BTEC National Diploma and Extended National Diploma Qualifications (QCF; NQF; OCR) on a case-by-case basis. Please contact us for further advice on your individual circumstances.
34 points overall or 17 points at HL including Mathematics 6 at HL
The University welcomes applications from international students. Our international recruitment team can guide you on entry requirements. See our International Student website for further information about entry requirements for your country.
However, please note that international fee-paying students cannot undertake a part-time programme due to visa restrictions.
If you need to increase your level of qualification ready for undergraduate study, we offer a number of International Foundation Programmes.
For more advice about applying to Kent, you can meet our staff at a range of international events.
International students will need to demonstrate their proficiency in English: average 6.5 in IELTS test with minimum 6.0 in reading and writing or equivalent.
Please see our English language entry requirements web page.
Please note that if you are required to meet an English language condition, we offer a number of pre-sessional courses in English for Academic Purposes through Kent International Pathways.
Duration: 4 years full-time
The following modules are indicative of those offered on this programme. This listing is based on the current curriculum and may change year to year in response to new curriculum developments and innovation.
On most programmes, you study a combination of compulsory and optional modules. You may also be able to take ‘elective’ modules from other programmes so you can customise your programme and explore other subjects that interest you.
Introduction to R and investigating data sets. Basic use of R (Input and manipulation of data). Graphical representations of data. Numerical summaries of data.
Sampling and sampling distributions. ?² distribution. t-distribution. F-distribution. Definition of sampling distribution. Standard error. Sampling distribution of sample mean (for arbitrary distributions) and sample variance (for normal distribution) .
Point estimation. Principles. Unbiased estimators. Bias, Likelihood estimation for samples of discrete r.v.s
Interval estimation. Concept. One-sided/two-sided confidence intervals. Examples for population mean, population variance (with normal data) and proportion.
Hypothesis testing. Concept. Type I and II errors, size, p-values and power function. One-sample test, two sample test and paired sample test. Examples for population mean and population variance for normal data. Testing hypotheses for a proportion with large n. Link between hypothesis test and confidence interval. Goodness-of-fit testing.
Association between variables. Product moment and rank correlation coefficients. Two-way contingency tables. ?² test of independence.
This module serves as an introduction to algebraic methods. These methods are central in modern mathematics and have found applications in many other sciences, but also in our everyday life. In this module, students will also gain an appreciation of the concept of proof in mathematics.
This module introduces mathematical modelling and Newtonian mechanics. Tutorials and Maple worksheets will be used to support taught material.
The modelling cycle: General description with examples; Newton's law of cooling; population growth (Malthusian and logistic models); simple reaction kinetics (unimolecular and bimolecular reactions); dimensional consistency
Motion of a body: frames of reference; a particle's position vector and its time derivatives (velocity and acceleration) in Cartesian coordinates; mass, momentum and centre of mass; Newton's laws of motion; linear springs; gravitational acceleration and the pendulum; projectile motion
Orbital motion: Newton's law of gravitation; position, velocity and acceleration in plane polar coordinates; planetary motion and Kepler's laws.
This module is a sequel to Algebraic Methods. It considers the abstract theory of linear spaces together with applications to matrix algebra and other areas of Mathematics (and its applications). Since linear spaces are of fundamental importance in almost every area of mathematics, the ideas and techniques discussed in this module lie at the heart of mathematics. Topics covered will include vector spaces, linear transformations, eigenvalues and eigenvectors, diagonalisation, orthogonality and applications including conics.
This module introduces widely-used mathematical methods for functions of a single variable. The emphasis is on the practical use of these methods; key theorems are stated but not proved at this stage. Tutorials and Maple worksheets will be used to support taught material.
Complex numbers: Complex arithmetic, the complex conjugate, the Argand diagram, de Moivre's Theorem, modulus-argument form; elementary functions
Polynomials: Fundamental Theorem of Algebra (statement only), roots, factorization, rational functions, partial fractions
Single variable calculus: Differentiation, including product and chain rules; Fundamental Theorem of Calculus (statement only), elementary integrals, change of variables, integration by parts, differentiation of integrals with variable limits
Scalar ordinary differential equations (ODEs): definition; methods for first-order ODEs; principle of superposition for linear ODEs; particular integrals; second-order linear ODEs with constant coefficients; initial-value problems
Curve sketching: graphs of elementary functions, maxima, minima and points of inflection, asymptotes
This module introduces widely-used mathematical methods for vectors and functions of two or more variables. The emphasis is on the practical use of these methods; key theorems are stated but not proved at this stage. Tutorials and Maple worksheets will be used to support taught material.
Vectors: Cartesian coordinates; vector algebra; scalar, vector and triple products (and geometric interpretation); straight lines and planes expressed as vector equations; parametrized curves; differentiation of vector-valued functions of a scalar variable; tangent vectors; vector fields (with everyday examples)
Partial differentiation: Functions of two variables; partial differentiation (including the chain rule and change of variables); maxima, minima and saddle points; Lagrange multipliers
Integration in two dimensions: Double integrals in Cartesian coordinates; plane polar coordinates; change of variables for double integrals; line integrals; Green's theorem (statement – justification on rectangular domains only)
Introduction to Probability. Concepts of events and sample space. Set theoretic description of probability, axioms of probability, interpretations of probability (objective and subjective probability).
Theory for unstructured sample spaces. Addition law for mutually exclusive events. Conditional probability. Independence. Law of total probability. Bayes' theorem. Permutations and combinations. Inclusion-Exclusion formula.
Discrete random variables. Concept of random variable (r.v.) and their distribution. Discrete r.v.: Probability function (p.f.). (Cumulative) distribution function (c.d.f.). Mean and variance of a discrete r.v. Examples: Binomial, Poisson, Geometric.
Continuous random variables. Probability density function; mean and variance; exponential, uniform and normal distributions; normal approximations: standardisation of the normal and use of tables. Transformation of a single r.v.
Joint distributions. Discrete r.v.'s; independent random variables; expectation and its application.
Generating functions. Idea of generating functions. Probability generating functions (pgfs) and moment generating functions (mgfs). Finding moments from pgfs and mgfs. Sums of independent random variables.
Laws of Large Numbers. Weak law of large numbers. Central Limit Theorem.
Real Numbers: Rational and real numbers, absolute value and metric structure on the real numbers, induction, infimum and supremum.
Limits of Sequences: Sequences, definition of convergence, epsilon terminology, uniqueness, algebra of limits, comparison principles, standard limits, subsequences and non-existence of limits, convergence to infinity.
Completeness Properties: Cantor's Intersection Theorem, limit points, Bolzano-Weierstrass theorem, Cauchy sequences.
Continuity of Functions: Functions and basic definitions, limits of functions, continuity and epsilon terminology, sequential continuity, Intermediate Value Theorem.
Differentiation: Definition of the derivative, product rule, quotient rule and chain rule, derivatives and local properties, Mean Value Theorem, L'Hospital's Rule.
Taylor Approximation: Taylor's Theorem, remainder term, Taylor series, standard examples, limits using Taylor series.
The concept of symmetry is one of the most fruitful ideas through which mankind has tried to understand order and beauty in nature and art. This module first develops the concept of symmetry in geometry. It subsequently discusses links with the fundamental notion of a group in algebra. Outline syllabus includes: Groups from geometry; Permutations; Basic group theory; Action of groups and applications to (i) isometries of regular polyhedra; (ii) counting colouring problems; Matrix groups.
In this module we will study linear partial differential equations, we will explore their properties and discuss the physical interpretation of certain equations and their solutions. We will learn how to solve first order equations using the method of characteristics and second order equations using the method of separation of variables.
Introduction to linear PDEs: Review of partial differentiation; first-order linear PDEs, the heat equation, Laplace's equation and the wave equation, with simple models that lead to these equations; the superposition principle; initial and boundary conditions
Separation of variables and series solutions: The method of separation of variables; simple separable solutions of the heat equation and Laplace’s equation; Fourier series; orthogonality of the Fourier basis; examples and interpretation of solutions
Solution by characteristics: the method of characteristics for first-order linear PDEs; examples and interpretation of solutions; characteristics of the wave equation; d’Alembert’s solution, with examples; domains of influence and dependence; causality.
This module builds on the Stage 1 Real Analysis 1 module. We will extend our knowledge of functions of one real variable, look at series, and study functions of several real variables and their derivatives.
The outline syllabus includes: Continuity and uniform continuity of functions of one variable, series and power series, the Riemann integral, limits and continuity for functions of several variables, differentiation of functions of several variables, extrema, the Inverse and Implicit Function Theorems.
Can we square a circle? Can we trisect an angle? These two questions were studied by the Ancient Greeks and were only solved in the 19th century using algebraic structures such as rings, fields and polynomials. In this module, we introduce these ideas and concepts and show how they generalise well-known objects such as integers, rational numbers, prime numbers, etc. The theory is then applied to solve problems in Geometry and Number Theory. This part of algebra has many applications in electronic communication, in particular in coding theory and cryptography.
The security of our phone calls, bank transfers, etc. all rely on one area of Mathematics: Number Theory. This module is an elementary introduction to this wide area and focuses on solving Diophantine equations. In particular, we discuss (without proof) Fermat's Last Theorem, arguably one of the most spectacular mathematical achievements of the twentieth century. Outline syllabus includes: Modular Arithmetic; Prime Numbers; Introduction to Cryptography; Quadratic Residues; Diophantine Equations.
Probability: Joint distributions of two or more discrete or continuous random variables. Marginal and conditional distributions. Independence. Properties of expectation, variance, covariance and correlation. Poisson process and its application. Sums of random variables with a random number of terms.
Transformations of random variables: Various methods for obtaining the distribution of a function of a random variable —method of distribution functions, method of transformations, method of generating functions. Method of transformations for several variables. Convolutions. Approximate method for transformations.
Sampling distributions: Sampling distributions related to the Normal distribution — distribution of sample mean and sample variance; independence of sample mean and variance; the t distribution in one- and two-sample problems.
Statistical inference: Basic ideas of inference — point and interval estimation, hypothesis testing.
Point estimation: Methods of comparing estimators — bias, variance, mean square error, consistency, efficiency. Method of moments estimation. The likelihood and log-likelihood functions. Maximum likelihood estimation.
Hypothesis testing: Basic ideas of hypothesis testing — null and alternative hypotheses; simple and composite hypotheses; one and two-sided alternatives; critical regions; types of error; size and power. Neyman-Pearson lemma. Simple null hypothesis versus composite alternative. Power functions. Locally and uniformly most powerful tests. Composite null hypotheses. The maximum likelihood ratio test.
Interval estimation: Confidence limits and intervals. Intervals related to sampling from the Normal distribution. The method of pivotal functions. Confidence intervals based on the large sample distribution of the maximum likelihood estimator – Fisher information, Cramer-Rao lower bound. Relationship with hypothesis tests. Likelihood-based intervals.
This module is an introduction to the methods, tools and ideas of numerical computation. In mathematics, one often encounters standard problems for which there are no easily obtainable explicit solutions, given by a closed formula. Examples might be the task of determining the value of a particular integral, finding the roots of a certain non-linear equation or approximating the solution of a given differential equation. Different methods are presented for solving such problems on a modern computer, together with their applicability and error analysis. A significant part of the module is devoted to programming these methods and running them in MATLAB.
Introduction: Importance of numerical methods; short description of flops, round-off error, conditioning
Solution of linear and non-linear equations: bisection, Newton-Raphson, fixed point iteration
Interpolation and polynomial approximation: Taylor polynomials, Lagrange interpolation, divided differences, splines
Numerical integration: Newton-Cotes rules, Gaussian rules
Numerical differentiation: finite differences
Introduction to initial value problems for ODEs: Euler methods, trapezoidal method, Runge-Kutta methods.
This module introduces the basic ideas to solve certain ordinary differential equations, like first order scalar equations, second order linear equations and systems of linear equations. It mainly considers their qualitative and analytical aspects. Outline syllabus includes: First-order scalar ODEs; Second-order scalar linear ODEs; Existence and Uniqueness of Solutions; Autonomous systems of two linear first-order ODEs.
This module will present a new perspective on Newton's familiar laws of motion. First we introduce variational calculus with applications such as finding the paths of shortest distance. This will lead us to the principle of least action from which we can derive Newton's law for conservative forces. We will also learn how symmetries lead to constants of motion. We then derive Hamilton's equations and discuss their underlying structures. The formalisms we introduce in this module form the basis for all of fundamental modern physics, from electromagnetism and general relativity, to the standard model of particle physics and string theory.
Review of Newton mechanics: Newton's law; harmonic and anharmonic oscillators (closed and unbound orbits, turning points); Kepler problem: energy and angular momentum conservation
Lagrangian Mechanics: Introdution to variational calculus with simple applications (shortest path - geodesic, soap film, brachistochrone problem); principle of least action: Euler-Lagrange equations (Newtonian mechanics with conservative forces); constraints and generalised coordinates (particle on a hoop, double pendulum, normal modes); Noether's theorem (energy and angular momentum conservation)
Hamiltonian Dynamics: Hamilton's equations; Legendre transform; Hamiltonian phase space (harmonic oscillator, anharmonic oscillators and the mathematical pendulum); Liouville's theorem; Poisson brackets.
Constructing suitable models for data is a key part of statistics. For example, we might want to model the yield of a chemical process in terms of the temperature and pressure of the process. Even if the temperature and pressure are fixed, there will be variation in the yield which motivates the use of a statistical model which includes a random component. In this module, we study how suitable models can be constructed, how to fit them to data and how suitable conclusions can be drawn. Both theoretical and practical aspects are covered, including the use of R.
The main aim of this module is to give an introduction to the basics of differential geometry, keeping in mind the recent applications in mathematical physics and the analysis of pattern recognition. Outline syllabus includes: Curves and parameterization; Curvature of curves; Surfaces in Euclidean space; The first fundamental form; Curvature of surfaces; Geodesics.
Introduction: Principles and examples of stochastic modelling, types of stochastic process, Markov property and Markov processes, short-term and long-run properties. Applications in various research areas.
Random walks: The simple random walk. Walk with two absorbing barriers. First–step decomposition technique. Probabilities of absorption. Duration of walk. Application of results to other simple random walks. General random walks. Applications.
Discrete time Markov chains: n–step transition probabilities. Chapman-Kolmogorov equations. Classification of states. Equilibrium and stationary distribution. Mean recurrence times. Simple estimation of transition probabilities. Time inhomogeneous chains. Elementary renewal theory. Simulations. Applications.
Continuous time Markov chains: Transition probability functions. Generator matrix. Kolmogorov forward and backward equations. Poisson process. Birth and death processes. Time inhomogeneous chains. Renewal processes. Applications.
Queues and branching processes: Properties of queues - arrivals, service time, length of the queue, waiting times, busy periods. The single-server queue and its stationary behaviour. Queues with several servers. Branching processes. Applications.
Marks on this module can count towards exemption from the professional examination CT4 of the Institute and Faculty of Actuaries. Please see http://www.kent.ac.uk/casri/Accreditation/index.html for further details.
A time series is a collection of observations made sequentially in time. Examples occur in a variety of fields, ranging from economics to engineering, and methods of analysing time series constitute an important area of statistics. This module focuses initially on various time series models, including some recent developments, and provides modern statistical tools for their analysis. The second part of the module covers extensively simulation methods. These methods are becoming increasingly important tools as simulation models can be easily designed and run on modern PCs. Various practical examples are considered to help students tackle the analysis of real data.The syllabus includes: Difference equations, Stationary Time Series: ARMA process. Nonstationary Processes: ARIMA Model Building and Testing: Estimation, Box Jenkins, Criteria for choosing between models, Diagnostic tests.Forecasting: Box-Jenkins, Prediction bounds. Testing for Trends and Unit Roots: Dickey-Fuller, ADF, Structural change, Trend-stationarity vs difference stationarity. Seasonality and Volatility: ARCH, GARCH, ML estimation. Multiequation Time Series Models: Spectral Analysis. Generation of pseudo – random numbers, simulation methods: inverse transform and acceptance-rejection, design issues and sensitivity analysis.
Marks on this module can count towards exemption from the professional examination CT6 of the Institute and Faculty of Actuaries. Please see http://www.kent.ac.uk/casri/Accreditation/index.html for further details.
Sampling: Simple random sampling. Sampling for proportions and percentages. Estimation of sample size. Stratified sampling. Systematic sampling. Ratio and regression estimates. Cluster sampling. Multi-stage sampling and design effect. Questionnaire design. Response bias and non-response.
General principles of experimental design: blocking, randomization, replication. One-way ANOVA. Two-way ANOVA. Orthogonal and non-orthogonal designs. Factorial designs: confounding, fractional replication. Analysis of covariance.
Design of clinical trials: blinding, placebos, eligibility, ethics, data monitoring and interim analysis. Good clinical practice, the statistical analysis plan, the protocol. Equivalence and noninferiority.
Multivariate normal distribution, Inference from multivariate normal samples, principal component analysis, mixture models, factor analysis, clustering methods, discrimination and classification, graphical models, the use of appropriate software.
This is a practical module to develop the skills required by a professional statistician (report writing, consultancy, presentation, wider appreciation of assumptions underlying methods, selection and application of analysis method, researching methods).
Software: R, SPSS and Excel (where appropriate/possible). Report writing in Word. PowerPoint for presentations.
• Presentation of data
• Report writing and presentation skills
• Hypothesis testing: formulating questions, converting to hypotheses, parametric and non-parametric methods and their assumptions, selection of appropriate method, application and reporting. Use of resources to explore and apply additional tests. Parametric and non-parametric tests include, but are not limited to, t-tests, likelihood ratio tests, score tests, Wald test, chi-squared tests, Mann Whitney U-test, Wilcoxon signed rank test, McNemar's test.
• Linear and Generalised Linear Models: simple linear and multiple regression, ANOVA and ANCOVA, understanding the limitations of linear regression, generalised linear models, selecting the appropriate distribution for the data set, understanding the difference between fixed and random effects, fitting models with random effects, model selection.
• Consultancy skills: group work exercise(s)
Statistics methods contribute significantly to areas such as biology, ecology, sociology and economics. The real data collected does not always follow standard statistical models. This module looks at modern statistical models and methods that can be utilised for such data, making use of R programs to execute these methods.
Indicative module content: Motivating examples; model fitting through maximum likelihood for specific examples; function optimization methods; profile likelihood; score tests; Wald tests; confidence interval construction; latent variable models; EM algorithm; mixture models; simulation methods; importance sampling; kernel density estimation; Monte Carlo inference; bootstrap; permutation tests; R programs.
Revision of complex numbers, the complex plane, de Moivre's and Euler's theorems, roots of unity, triangle inequality
Sequences and limits: Convergence of a sequence in the complex plane. Absolute convergence of complex series. Criteria for convergence. Power series, radius of convergence
Complex functions: Domains, continuity, complex differentiation. Differentiation of power series. Complex exponential and logarithm, trigonometric, hyperbolic functions. Cauchy-Riemann equations
Complex Integration: Jordan curves, winding numbers. Cauchy's Theorem. Analytic functions. Liouville's Theorem, Maximum Modulus Theorem
Singularities of functions: poles, classification of singularities. Residues. Laurent expansions. Applications of Cauchy's theorem. The residue theorem. Evaluation of real integrals.
Possible additional topics may include Rouche’s Theorem, other proofs of the Fundamental Theorem of Algebra, conformal mappings, Mobius mappings, elementary Riemann surfaces, and harmonic functions.
In this module we study the fundamental concepts and results in game theory. We start by analysing combinatorial games, and discuss game trees, winning strategies, and the classification of positions in so called impartial combinatorial games. We then move on to discuss two-player zero-sum games and introduce security levels, pure and mixed strategies, and prove the famous von Neumann Minimax Theorem. We will see how to solve zero-sum two player games using domination and discuss a general method based on linear programming. Subsequently we analyse arbitrary sum two-player games and discuss utility, best responses, Nash equilibria, and the Nash Equilibrium Theorem. The final part of the module is devoted to multi-player games and cooperation; we analyse coalitions, the core of the game, and the Shapley value.
Integrable systems are special dynamical systems which can be solved exactly in some sense. They arise in a variety of settings, ranging from Hamiltonian systems and nonlinear wave equations to difference equations. This module covers the origins of the subject as well as modern topics like integrable maps and lattice equations.
* Liouville integrability in classical mechanics. Hamiltonian mechanics. Canonical symplectic form and Poisson brackets. Liouville's theorem (statement and examples). Lax pairs for finite-dimensional systems.
* Soliton equations. History and physical origins (e.g. Korteweg-de Vries and/or sine-Gordon). Conservation laws. Hamiltonian formalism. Lax pairs.
* Construction of solitons. Introduction to inverse scattering. Darboux-Bäcklund transformations. Hirota's method.
* Discrete integrability. Symplectic maps. Liouville's theorem (discrete version). Integrable lattice equations. Discrete Lax pairs with examples.
Discrete mathematics has found new applications in the encoding of information. Online banking requires the encoding of information to protect it from eavesdroppers. Digital television signals are subject to distortion by noise, so information must be encoded in a way that allows for the correction of this noise contamination. Different methods are used to encode information in these scenarios, but they are each based on results in abstract algebra. This module will provide a self-contained introduction to this general area of mathematics.
Syllabus: Modular arithmetic, polynomials and finite fields. Applications to
• orthogonal Latin squares,
• cryptography, including introduction to classical ciphers and public key ciphers such as RSA,
• "coin-tossing over a telephone",
• linear feedback shift registers and m-sequences,
• cyclic codes including Hamming,
This module provides an overview of analytical careers in finance and explores the mathematical techniques used by actuaries, accountants and financial analysts. Students will learn about different types of financials assets, such as shares, bonds and derivatives and how to work out how much they are worth. They will also look at different types of debt and learn how mortgages and other loans are calculated. Developing these themes, the module will explain how to use maths to make financial decisions, such as how much an investor should pay for a financial asset or how a company can decide which projects to invest in or how much money to borrow. Risk management is a vital part of most mathematical careers in finance so the module will also cover different mathematical techniques for measuring and mitigating financial risk. Extension topics may include complex derivatives, economic theories of finance and the dangers of misusing mathematics. The module provides an opportunity to apply complex mathematical techniques to important real-world questions and is excellent preparation for those considering a financial career.
Introduction to financial mathematics: Key uses of mathematics in finance; key practitioners of financial mathematics.
Financial valuation and cash flow analysis: Discounting, Interest rates and time requirements, Future and Present value. Project Evaluation.
Characteristics and valuation of different financial securities: Debt capital, bonds and stocks, valuation of bonds and stocks.
Loans and interest rates: term structure of interest rates, spot and forward rates, types of loan, APR, loan schedules.
Capital structure and the cost of capital: Gearing, WACC, understanding betas.
Additional topics that may be covered: arbitrage and forward contracts, efficient markets hypothesis, pricing and valuing forward contracts, option pricing and the Black Scholes model, credit derivatives and systemic risks, limitations of mathematical modelling.
Linear PDEs. Dispersion relations. Review of d'Alembert’s solutions of the wave equation. Review of Fourier transforms for solving linear diffusion equations.
Quasi-linear first-order PDEs. Total differential equations. Integral curves and integrability conditions. The method of characteristics.
Shock waves. Discontinuous solutions. Breaking time. Rankine-Hugoniot jump condition. Shock waves. Rarefaction waves. Applications of shock waves, including traffic flow.
General first-order nonlinear PDEs. Charpit's method, Monge Cone, the complete integral.
Nonlinear PDEs. Burgers' equation; the Cole-Hopf transformation and exact solutions. Travelling wave and scaling solutions of nonlinear PDEs. Applications of travelling wave and scaling solutions to reaction-diffusion equations. Exact solutions of nonlinear PDEs. Applications of nonlinear waves, including to ocean waves (e.g. rogue waves, tsunamis).
Matrix theory: Hermitian and symmetric matrices, spaces of these matrices and the associated inner product, diagonalization, orthonormal basis of eigenvectors, spectral properties, positive definite matrices and their roots
Hilbert space theory: inner product spaces and Hilbert spaces, L^2 and l^2 spaces, orthogonality, bases, Gram-Schmidt procedure, dual space, Riesz representation theorem
Linear operators: the space of bounded linear operators with the operator norm, inverse and adjoint operators, Hermitian operators, infinite matrices, spectrum, compact operators, Hilbert-Schmidt operators, the spectral theorem for compact Hermitian operators.
There is no specific mathematical syllabus for this module; students will chose a topic in mathematics, statistics or financial mathematics from a published list on which to base their coursework assessments (different topics for levels 6 and 7). The coursework is supported by a series of workshops covering various forms of written and oral communication. These may include critically evaluating the following: a research article in mathematics, statistics or finance; a survey or magazine article aimed at a scientifically-literate but non-specialist audience; a mathematical biography; a poster presentation of a mathematical topic; a curriculum vitae; an oral presentation with slides or board; a video or podcast on a mathematical topic. Guidance will be given on typesetting mathematics using LaTeX.
This module provides an introduction to the study of orthogonal polynomials and special functions. They are essentially useful mathematical functions with remarkable properties and applications in mathematical physics and other branches of mathematics. Closely related to many branches of analysis, orthogonal polynomials and special functions are related to important problems in approximation theory of functions, the theory of differential, difference and integral equations, whilst having important applications to recent problems in quantum mechanics, mathematical statistics, combinatorics and number theory. The emphasis will be on developing an understanding of the structural, analytical and geometrical properties of orthogonal polynomials and special functions. The module will utilise physical, combinatorial and number theory problems to illustrate the theory and give an insight into a plank of applications, whilst including some recent developments in this field. The development will bring aspects of mathematics as well as computation through the use of MAPLE. The topics covered will include: The hypergeometric functions, the parabolic cylinder functions, the confluent hypergeometric functions (Kummer and Whittaker) explored from their series expansions, analytical and geometrical properties, functional and differential equations; sequences of orthogonal polynomials and their weight functions; study of the classical polynomials and their applications as well as other hypergeometric type polynomials.
This module provides a rigorous foundation for the solution of systems of polynomial equations in many variables. In the 1890s, David Hilbert proved four ground-breaking theorems that prepared the way for Emmy Nöther's famous foundational work in the 1920s on ring theory and ideals in abstract algebra. This module will echo that historical progress, developing Hilbert's theorems and the essential canon of ring theory in the context of polynomial rings. It will take a modern perspective on the subject, using the Gröbner bases developed in the 1960s together with ideas of computer algebra pioneered in the 1980s. The syllabus will include
• Multivariate polynomials, monomial orders, division algorithm, Gröbner bases;
• Hilbert's Nullstellensatz and its meaning and consequences for solving polynomials in several variables;
• Elimination theory and applications;
• Linear equations over systems of polynomials, syzygies.
Groups arise naturally in many areas of mathematics as well as in chemistry and physics. A concrete way to approach groups is by representing them as a group of matrices, in which explicit computations are easy. This approach has been very fruitful in developing our understanding of groups over the last century. It also helps students to understand aspects of their mathematical education in a broader context, in particular concepts from earlier modules (From Geometry to Algebra/Groups and Symmetries and Linear Algebra) have been amalgamated into more general and powerful tools.
This module will provide a rigorous introduction to the main ideas and notions of groups and representations. It will also have a strong computational strand: a large part of the module will be devoted to explicit computations of representations and character tables (a table of complex numbers associated to any finite group).
Most differential equations which arise from physical systems cannot be solved explicitly in closed form, and thus numerical solutions are an invaluable way to obtain information about the underlying physical system. The first half of the module is concerned with ordinary differential equations. Several different numerical methods are introduced and error growth is studied. Both initial value and boundary value problems are investigated. The second half of the module deals with the numerical solution of partial differential equations. The syllabus includes: initial value problems for ordinary differential equations; Taylor methods; Runge-Kutta methods; multistep methods; error bounds and stability; boundary value problems for ordinary differential equations; finite difference schemes; difference schemes for partial differential equations; iterative methods; stability analysis.
• Introduction to Matrix Lie Groups: Basic examples. Matrix groups GL(n), SL(n), SO(n), Sp(n).
• Representations of SU(2): Tensor product of representations, Clebsch-Gordan series for SU(2).
• The Lie algebra of a Lie group. The exponential map.
• Introduction to Lie algebras: The Lie algebras gl(n), sl(n), so(n), sp(n). Nilpotent, solvable and semi-simple Lie algebras. The adjoint action of a group on its Lie algebra, and of a Lie algebra on itself. Derivations.
• Representations of sl(2).
Quantum mechanics provides an accurate description of nature on a subatomic scale, where the standard rules of classical mechanics fail. It is an essential component of modern technology and has a wide range of fascinating applications. This module introduces some of the key concepts of quantum mechanics from a mathematical point of view.
The joint level 6/level 7 curriculum will consist of the following:
• The necessity for quantum mechanics. The wavefunction and Born's probabilistic interpretation.
• Solutions of the time-dependent and time-independent Schrödinger equation for a selection of simple potentials in one dimension.
• Reflection and transmission of particles incident onto a potential barrier. Probability flux. Tunnelling of particles.
• Wavefunctions and states, Hermitian operators, outcomes and collapse of the wavefunction.
• Heisenberg's uncertainty principle.
Additional topics may include applications of quantum theory to physical systems, quantum computing or recent developments in the quantum world.
The 2020/21 annual tuition fees for this programme are:
For details of when and how to pay fees and charges, please see our Student Finance Guide.
Full-time tuition fees for Home and EU undergraduates are £9,250.
For students continuing on this programme, fees will increase year on year by no more than RPI + 3% in each academic year of study except where regulated.*
The University will assess your fee status as part of the application process. If you are uncertain about your fee status you may wish to seek advice from UKCISA before applying.
Kent offers generous financial support schemes to assist eligible undergraduate students during their studies. See our funding page for more details.
You may be eligible for government finance to help pay for the costs of studying. See the Government's student finance website.
Scholarships are available for excellence in academic performance, sport and music and are awarded on merit. For further information on the range of awards available and to make an application see our scholarships website.
At Kent we recognise, encourage and reward excellence. We have created the Kent Scholarship for Academic Excellence.
The scholarship will be awarded to any applicant who achieves a minimum of AAA over three A levels, or the equivalent qualifications (including BTEC and IB) as specified on our scholarships pages.
The scholarship is also extended to those who achieve AAB at A level (or specified equivalents) where one of the subjects is either mathematics or a modern foreign language. Please review the eligibility criteria.
Teaching amounts to typically 16 hours of lectures and classes per week. Modules involving programming or working with computer software packages usually include practical sessions. Lectures are given by a wide variety of lecturers, all with different research backgrounds.
Assessment is carried out by means of: coursework involving problems; computer assignments; projects; tests; and written examinations. MMath students complete a dissertation as part of their Stage 4 studies.
For a student studying full time, each academic year of the programme will comprise 1200 learning hours which include both direct contact hours and private study hours. The precise breakdown of hours will be subject dependent and will vary according to modules. Please refer to the individual module details under Course Structure.
Methods of assessment will vary according to subject specialism and individual modules. Please refer to the individual module details under Course Structure.
The programme aims to:
You gain knowledge and understanding of:
You develop your intellectual skills in the following areas:
You gain subject-specific skills in the following areas:
You gain transferable skills in the following areas:
All University of Kent courses are regulated by the Office for Students.
Based on the evidence available, the TEF Panel judged that the University of Kent delivers consistently outstanding teaching, learning and outcomes for its students. It is of the highest quality found in the UK.
Please see the University of Kent's Statement of Findings for more information.
Mathematics at Kent scored 91% overall in The Complete University Guide 2021.
For graduate prospects, Mathematics at Kent was ranked 3rd in The Complete University Guide 2021, and scored over 89% in The Times Good University Guide 2020 and 87% in The Guardian University Guide 2020.
Over 95% of Mathematics and Statistics graduates who responded to the most recent national survey of graduate destinations were in work or further study within six months (DLHE, 2017).
Recent graduates have gone on to work in:
The University has a friendly Careers and Employability Service, which can give you advice on how to:
You graduate with an excellent grounding in the fundamental concepts and principles of mathematics. Many career paths can benefit from the numerical and analytical skills you develop during your studies.
To help you appeal to employers, you also learn key transferable skills that are essential for all graduates. These include the ability to:
You can also gain extra skills by signing up for one of our Kent Extra activities, such as learning a language or volunteering.
This degree will meet the educational requirements of the Chartered Mathematician designation, awarded by the Institute of Mathematics and its Applications.
The Start now button below takes you to Kent's short form, which you need to fill in and submit. We'll review your application and let you know if we can offer you a place. If you wish to accept our offer, you need to confirm this via UCAS Track. To do so, you'll need the following:
Discover Uni is designed to support prospective students in deciding whether, where and what to study. The site replaces Unistats from September 2019.
Discover Uni is jointly owned by the Office for Students, the Department for the Economy Northern Ireland, the Higher Education Funding Council for Wales and the Scottish Funding Council.
Find out more about the Unistats dataset on the Higher Education Statistics Agency website.